How to Paint Your Own Home Without a builder

How to paint your own house without a builder? Do you feel the atmosphere of your home boring? You want to change it by changing the paint color of the wall?
Of course we hope that this painting tips can help you in changing the color of your house paint to be more appropriate to your art taste and comfort and more able to bring a fresh new atmosphere.

1. Clean Wall

Make sure the surface of the wall you want to paint clean from the dust. Clean the dirt and dirt on the wall area. Dirt on this wall is very obligatory to remove. Dust, dirt and oil stains will make the paint finishes not smooth and evenly distributed. Clean up with water mixed with a mild formulas and cellulose sponge. Scrub the sponge against the wall until it is clean, then rinse with water to remove soap residue.

2. Protect Parts That Do not Want to Paint with Duct tape

Barriers between walls and floors, windows and window frames should normally be covered to avoid paint stain. Protect parts of the house that do not want to be painted with duct tape or adhesive tape when painting. When finished, immediately remove the adhesive tape before the paint is drying the paint so that the paint is not removed.

3. Cover the Cracks on the Wall

Use plamir (putty wall) to close the crack or crack on the wall, then smooth it using sandpaper. Also apply a paint primer, a type of liquid applied before painting to obtain a flat and shiny finish.

4. Use a Small Brush on the Narrow Section

Roller-painting tools can not be applied to any part of the wall, only on a large area. As for the difficult areas such as the corner of the room, use a two inch wide brush.

5. Use the Zig-Zag Movement Technique

The trick of painting flat is to make the zig-zag movement from top to bottom repeatedly until the wall is covered flat. After 2-3 hours of new layer back with paint to more smooth results. Roller can be used to flatten wall surface color. For more info you can visit this link http://powerhousepainting.com.au/